# generated by PrusaSlicer 2.5.0 on 2023-01-03 at 11:14:59 UTC absolute_correction = 0 area_fill = 50 bed_custom_model = bed_custom_texture = bed_shape = 0x0,99.8169x0,99.8169x54.986,0x54.986 bottle_cost = 0 bottle_volume = 1000 bottle_weight = 1 compatible_printers_condition_cummulative = "printer_model==\"SL1\"";"printer_model==\"SL1\"" compatible_prints = compatible_prints_condition = layer_height == 0.1 compatible_prints_condition_cummulative = "layer_height == 0.1" default_sla_material_profile = Prusa Orange Tough @0.05 default_sla_print_profile = 0.05 Normal display_height = 54.986 display_mirror_x = 0 display_mirror_y = 0 display_orientation = landscape display_pixels_x = 854 display_pixels_y = 480 display_width = 99.8169 elefant_foot_compensation = 0 elefant_foot_min_width = 0.2 exposure_time = 15 faded_layers = 10 fast_tilt_time = 5 gamma_correction = 1 high_viscosity_tilt_time = 10 hollowing_closing_distance = 2 hollowing_enable = 0 hollowing_min_thickness = 3 hollowing_quality = 0.5 host_type = octoprint inherits_cummulative = "0.1 Fast";"Prusa Orange Tough @0.1";"Original Prusa SL1" initial_exposure_time = 120 initial_layer_height = 0.1 layer_height = 0.1 material_colour = #FF8040 material_correction = 1,1,1 material_correction_x = 1 material_correction_y = 1 material_correction_z = 1 material_density = 1 material_notes = material_print_speed = fast material_type = Tough material_vendor = Made for Prusa max_exposure_time = 150 max_initial_exposure_time = 300 max_print_height = 120 min_exposure_time = 1 min_initial_exposure_time = 1 output_filename_format = [input_filename_base].sl1 pad_around_object = 0 pad_around_object_everywhere = 0 pad_brim_size = 1.6 pad_enable = 1 pad_max_merge_distance = 50 pad_object_connector_penetration = 0.3 pad_object_connector_stride = 10 pad_object_connector_width = 0.5 pad_object_gap = 1 pad_wall_height = 0 pad_wall_slope = 45 pad_wall_thickness = 0.5 physical_printer_settings_id = print_host = printer_model = SL1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n printer_settings_id = Sparkmaker printer_technology = SLA printer_variant = default printer_vendor = printhost_apikey = printhost_cafile = relative_correction = 1,1 relative_correction_x = 1 relative_correction_y = 1 relative_correction_z = 1 sla_material_settings_id = Prusa Orange Tough @0.1 - Copy sla_print_settings_id = 0.1 Fast - Copy slice_closing_radius = 0.005 slicing_mode = regular slow_tilt_time = 8 support_base_diameter = 3 support_base_height = 1 support_base_safety_distance = 1 support_buildplate_only = 0 support_critical_angle = 45 support_head_front_diameter = 0.5 support_head_penetration = 0.5 support_head_width = 3 support_max_bridge_length = 10 support_max_bridges_on_pillar = 3 support_max_pillar_link_distance = 10 support_object_elevation = 5 support_pillar_connection_mode = zigzag support_pillar_diameter = 1.3 support_pillar_widening_factor = 0 support_points_density_relative = 100 support_points_minimal_distance = 1 support_small_pillar_diameter_percent = 60% supports_enable = 1 thumbnails = 400x400,800x480